Birthday Card

Lori's Garden
Fancy Frames
Flower Shoppe
Plantin SchoolBook

Card base Bazzill White card 5 1/8 square. To make the mats for the base of the card I used the print pattern on page 35, the floral print on page 43 and the bird cage print on page 35 from Lori's Garden. The print pattern is 5 1/8 square. The bird cage print is 4 7/8 square and the floral print is 4 1/2 inch square. These mats were adhered flat onto the card base. On top of these mats I adhered a 10cm lace doilie.
The pink strip was printed from the Imagine using the color palette from Lori's Garden. I used a 6 x 6 inch square of the print pattern and edged it with Martha Stewart Punch around the Page Swirling Lace punch and cut this to fit onto the pink strip. On top of this element I adhered sheer ribbon. This element was adhered flat onto the card base.
From the Fancy Frames cartridge I cut frame 12 and used the color palette from Lori's Garden. The frame was printed and cut at 3". One was cut using brown for a shadow and one in pink for the top layer. For the centre of the frame I cut out an oval using the print paper that was left over from creating the lace border. The frame was adhered flat onto the card. I used Plantin Schoolbook to create the number 70.
I created the flower using the cut on page 14 of the Flower Shoppe handbook Heart 2. I cut two flowers @ 2 inches two flowers @ 1.5 inches and two flowers @ 1 inch. I used the floral print for the 2 inch and 1 1/2 inch flowers. For the inch flower I used the pink from the Lori's Garden colour palette. I curled each petal using my fingers. I glued each flower layer together and for the centre of the flower I used a pearl. Before adhering the flower onto the card I looped three pieces of sheer ribbon and attached these onto the card using glue dots. I adhered the flower using pop dots. The Happy Birthday element is from Lori's Garden and was printed and cut @ 1.5 inches. I adhered this element to the card using pop dots. To finish off the front of the card I adhered a bow onto the frame and put 3 pearls onto the border element. Inside of the card I adhered a 4 3/4 inch square pink card and glued a butterfly that was printed and cut @ 1 inch. This butterfly is on page 12 of the Lori's Garden handbook.

Cricut Imagine Lori's Garden
Cricut projects Flower Shoppe

To start this project I painted the box using KAISERcolour Mud Puddle. I painted the inside and the outside of the box. For the outside of the box I printed a full sheet of the pattern on page 37 of the handbook. From this I cut two pieces approx 2 3/4 inch wide. I matched up the pattern for the join at the front of the box. To adhere all the paper to the box I used Helmar Professional Acid Free Glue. For the top of the lid, the base, and the inside of the box I used the circle from the Cricut Imagine shapes. For the top of the lid I used the pattern on page 38 of the handbook (Lori's Garden) For the inside of the lid I used the pattern on page 40 and for the base of the box I used the pattern on page 36. For the inside base of the box I cut a circle from a full sheet I had printed for the rim of the lid. To make the flowers for the lid I used the Flower Shoppe cartridge on the Cricut Expression. I had a piece of card that I had previously printed using Lori's Garden with the pattern from page 43 in the handbook. All the card I used to make the flowers was from the stash. All the cuts for the flowers were inked before they were assembled. I used Tim Holtz Distress Ink Tea Dye. I placed a pearl in the centre of each flower and put Kindy Glitz Crystalina on top of the flowers. The flowers have been adhered to the lid at different heights using pop dots. To make the embellishment "Life's Little Treasures" I used Adobe Photoshop to create this using my computer. This embellishment measures 2 1/2 x 2. In each corner I added a small brown split pin. To add dimension I coated this with RoyalCoat Dimensional Magic. This was adhered to the box using pop dots. The butterfly's were printed and cut @ 1. using the layers Page 12 in the handbook. They have also been inked with the tea dye distress ink. To create the lace feature for the top of the box I used 2 1/2 wide lace and folded it until I got the desired look I wanted. I used a needle and thread to secure the folds and sew the button on. This was adhered to the lid with Pritt Gel. I adhered the small pink button on top of the larger button using a glue dot. Other items I used- measuring tap ribbon and 3 buttons.