Sunday, November 6, 2011







Cricut Art Philosophy Close to my Heart

For the base of the card I used Bazzill card and Kaisercraft Vintage Timeless 6.5" paper pad. I used the card cutout from page 36 in the handbook. I also cut out the shape and the layer. The stamped image used comes with the Art Philosophy cartridge. I used Memento Rich Cocoa to stamp the image. After I had assembled the base cutouts and had adhered the stamped sentiment I cut out a piece of Bazzill card rounded the corners and adhered this behind inside the card to give a finished look. The swirl is from page 58 in the handbook. These were cut also as a mirror image. I cut each swirl out four times and adhered them together to give a faux chipboard effect. The pattern paper for the swirl from Vintage Timeless. The small flowers are punched out using a Stampin Up punch Three for you. For the centre of these flowers I used Kaisercraft Droplets. For the roses I used the cutout on page 68 of the Arts Philosophy handbook. I cut the large flower @ 2.5 and the smaller flowers @ 2. For the centre of the roses I used liquid pearl as a fill and when that dried I placed a pink pearl on top of each flower. To create the leaves I used the cutout on page 28 of the handbook. These were folded, inked and I painted them with paper tole gloss. The raffia element was also painted with the gloss. To finish off the card I painted each flower with Smooch Pearlized Accent Ink and Pearlized Top Coat.

Easel Card - Happy Birthday



Baby Boutique
Cricut Imagine


Card base Bazzill card cut @ 12 x 6 scored at 6 and nine inches. The base for the front of the card cut one square 6 x 6 inches. I printed the pattern (pink) on page 37 in the handbook @ 5.9 three times. The pattern on page 40 (pink) in the handbook and the pattern on page 44 ( pink) @ 5.9.
The elements for the card 1 lace doilies 11.5 cm, pink pearls, ribbon. Elements from the Baby Boutique cartridge using the layer feature I printed the crown @ approx 3.5. I enhanced this cutout by colouring with a pink copic marker, dimensional magic and pearls. From page 36 in the handbook I printed and cut the calender (pink). I used a stamp and Memento Rich Coco ink pad to stamp the Happy Birthday sentiment. I cut out a pink circle and a larger circle using the pattern on page 43 of the handbook. I adhered these two circles together to create one element. For the base of the card I printed and cutout the monogram letters @ 1.5. For the base for the ribbon element on the front of the card I used a Martha Stewart Lace border punch. On the inside of the card I cut one strip of Bazzill pink card @ 2.5 inches. I cut a strip of the pattern paper @ 2 inches and adhered these two pieces together and adhered the monogram letters flat. To adhere this element onto the base of the card I used pop dots.

Tuesday, September 20, 2011

Birthday Card





Lori's Garden
Fancy Frames
Flower Shoppe
Plantin SchoolBook

Card base Bazzill White card 5 1/8 square. To make the mats for the base of the card I used the print pattern on page 35, the floral print on page 43 and the bird cage print on page 35 from Lori's Garden. The print pattern is 5 1/8 square. The bird cage print is 4 7/8 square and the floral print is 4 1/2 inch square. These mats were adhered flat onto the card base. On top of these mats I adhered a 10cm lace doilie.
The pink strip was printed from the Imagine using the color palette from Lori's Garden. I used a 6 x 6 inch square of the print pattern and edged it with Martha Stewart Punch around the Page Swirling Lace punch and cut this to fit onto the pink strip. On top of this element I adhered sheer ribbon. This element was adhered flat onto the card base.
From the Fancy Frames cartridge I cut frame 12 and used the color palette from Lori's Garden. The frame was printed and cut at 3". One was cut using brown for a shadow and one in pink for the top layer. For the centre of the frame I cut out an oval using the print paper that was left over from creating the lace border. The frame was adhered flat onto the card. I used Plantin Schoolbook to create the number 70.
I created the flower using the cut on page 14 of the Flower Shoppe handbook Heart 2. I cut two flowers @ 2 inches two flowers @ 1.5 inches and two flowers @ 1 inch. I used the floral print for the 2 inch and 1 1/2 inch flowers. For the inch flower I used the pink from the Lori's Garden colour palette. I curled each petal using my fingers. I glued each flower layer together and for the centre of the flower I used a pearl. Before adhering the flower onto the card I looped three pieces of sheer ribbon and attached these onto the card using glue dots. I adhered the flower using pop dots. The Happy Birthday element is from Lori's Garden and was printed and cut @ 1.5 inches. I adhered this element to the card using pop dots. To finish off the front of the card I adhered a bow onto the frame and put 3 pearls onto the border element. Inside of the card I adhered a 4 3/4 inch square pink card and glued a butterfly that was printed and cut @ 1 inch. This butterfly is on page 12 of the Lori's Garden handbook.

Sunday, September 4, 2011

Country Carnival

Walk in my Garden

Animal Kingdom

Lori's Garden
and the Cricut Craft Room

The base for this layout is Core Color core'dinations card and BasicGrey "Scarlet's Letter". I've edged the BasicGrey paper with Martha Stewart Punch around the page Wild flowers punch. The title Gallery was printed and cut @ 2 using the Country Carnival Imagine cartridge and the title Walk was printed and cut @ 1.5. The mushrooms are from Lori's Garden. I've altered the patterns on the mushrooms in the Cricut Craft Room. To keep to the colour theme I've used patterns from the Country Carnival cartridge. I printed and cut the mushrooms @ 2. For the tulips I used the Cricut Imagine with the cartridges Walk in my Garden and Country Carnival. I also selected the patterns from the Country Carnival cartridge for the colour of the tulips. They were also cut @ 2. For the stems I used the colour palette and the pattern on page 58 of the handbook. The duck is on page 87 Animal Kingdom cartridge. Once again I used the colour palette and the patterns from the Country Carnival cartridge. The duck was also cut @ 2.

Cricut Craft Room

Mushrooms Page 13 Lori's Garden handbook.

Saturday, August 27, 2011










Cricut Imagine Lori's Garden
Cricut projects Flower Shoppe


To start this project I painted the box using KAISERcolour Mud Puddle. I painted the inside and the outside of the box. For the outside of the box I printed a full sheet of the pattern on page 37 of the handbook. From this I cut two pieces approx 2 3/4 inch wide. I matched up the pattern for the join at the front of the box. To adhere all the paper to the box I used Helmar Professional Acid Free Glue. For the top of the lid, the base, and the inside of the box I used the circle from the Cricut Imagine shapes. For the top of the lid I used the pattern on page 38 of the handbook (Lori's Garden) For the inside of the lid I used the pattern on page 40 and for the base of the box I used the pattern on page 36. For the inside base of the box I cut a circle from a full sheet I had printed for the rim of the lid. To make the flowers for the lid I used the Flower Shoppe cartridge on the Cricut Expression. I had a piece of card that I had previously printed using Lori's Garden with the pattern from page 43 in the handbook. All the card I used to make the flowers was from the stash. All the cuts for the flowers were inked before they were assembled. I used Tim Holtz Distress Ink Tea Dye. I placed a pearl in the centre of each flower and put Kindy Glitz Crystalina on top of the flowers. The flowers have been adhered to the lid at different heights using pop dots. To make the embellishment "Life's Little Treasures" I used Adobe Photoshop to create this using my computer. This embellishment measures 2 1/2 x 2. In each corner I added a small brown split pin. To add dimension I coated this with RoyalCoat Dimensional Magic. This was adhered to the box using pop dots. The butterfly's were printed and cut @ 1. using the layers Page 12 in the handbook. They have also been inked with the tea dye distress ink. To create the lace feature for the top of the box I used 2 1/2 wide lace and folded it until I got the desired look I wanted. I used a needle and thread to secure the folds and sew the button on. This was adhered to the lid with Pritt Gel. I adhered the small pink button on top of the larger button using a glue dot. Other items I used- measuring tap ribbon and 3 buttons.

Birthday Card





Imagine More
Birthday Bash

Card- Hero Hues (Hero Arts) A2 Folded Cards- Latte (outside) white (inside). To the card I adhered brown card leaving a small border of the Latte colour. Using the Imagine I printed and cut the pattern on page 41 of the handbook using the 5:7 rectangle @ 4. I trimmed the length then adhered this to the brown card leaving a small border. For the embellishments I printed and cut the Icons on page 31 of the Imagine More handbook. I printed and cut the Attention Icon @ 3 twice. One for the outside of the card and one for the inside. Take Note was printed and cut @ 3. This was adhered flat onto the card. From the Birthday Bash cartridge I printed the phrase on page 40 of the handbook It's your Day @ 2.3 using the same pattern from the Imagine More cartridge that I used for the base of the card. For the Happy Birthday I used Print Shop 22 the font is "Scroll" @ 28pt. I inked around the edges using Versa Color 55 Umber. I adhered this onto a piece of the brown card. To adhere the Attention icon and the Happy Birthday to the front of the card I used pop dots. For the inside of the card I used the same base as for the front. I adhered the Attention icon flat to the inside. The speech bubble which is on page 33 of the Imagine More handbook was printed and cut @ 2.8 and adhered flat. I used the speech bubble to write a special birthday message.

Birthday Card

Imagine More Cards

For the base of this card I used a pink card (105 x 150mm) from the Paper Xtra Card Kit. Using the Cricut Imagine I selected the 5x7 rectangle. The pattern for the base layer is on page 40 of the handbook. I printed this @ 5 and trimmed it to fit the card. This was adhered flat to the card base. For the scallop rectangle I selected the pattern on page 41 of the handbook. This was printed and cut @ 3.5. This was adhered flat on the pattern layer. I used the layered image on page 9 of the handbook these layers were printed and cut @ 3. The first two pieces were adhered together and then adhered flat onto the scallop rectangle. The happy bird-day and the bird were adhered onto the card using pop dots. I used white flowers. The larger flower was coloured with a Copic marker Baby Blue B21 using the air brush. I used a baby blue split pin to hold the flowers together. The flowers were adhered flat onto the card.To finish off the card I adhered a scallop rectangle and a bird inside. It was printed and cut using the same sizes as for the front of the card.